Starman002's dashboard

A comment on the question "Definition Update Error" in Sunbelt Software:

I thought the problem was fixed, but I was wrong. Updates are not working again. Here are the ping results. Each of these is times 4.
Reply from 64.128.133.140: bytes=32 time=69ms TTL=120
Ping statistics for 64.128.133.140: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate rount trip in milli-seconds: Minimum = 66ms, Maximum = 88mn, Average = 72ms. Does that help? Starman002 – Starman002, on November 25, 2008 04:24

Starman002 replied on November 25, 2008 02:20 to the question "Definition Update Error" in Sunbelt Software:

I did as above & the system did an update & installed Vipre. It is working well now. Thanks. Starman002

Starman002 marked one of Peterh's replies in Sunbelt Software as useful. Peterh replied to the question "Definition Update Error".

A comment on the question "Definition Update Error" in Sunbelt Software:

Nick H. my results are the following:
Pinging updates.sunbelt-software.com [127.0.0.1] with 32 bytes of data:

Reply from 127.0.0.1: bytes=32 time<1ms><1ms><1ms><1ms><0>,
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum =0ms, Average = 0ms

Please help. Starman002 – Starman002, on November 21, 2008 03:04

A comment on the question "Definition Update Error" in Sunbelt Software:

Nick H., Sorry, but this didn't make any difference. – Starman002, on November 15, 2008 17:34

A comment on the question "Definition Update Error" in Sunbelt Software:

Sorry, but I still have the problem. Starman002 – Starman002, on November 13, 2008 05:44

A comment on the question "Definition Update Error" in Sunbelt Software:

The firewall is not blocking Vipre. Just to test, I disabled the firewall & no change. Any other ideas? – Starman002, on November 10, 2008 22:47

A comment on the question "Definition Update Error" in Sunbelt Software:

This just started. I didn't change any firewall settings or turn-on any security or install any extra security programs. Perhaps it happened after an update. I don't know. But at one time I was getting updates without any problem. Starman002 – Starman002, on November 09, 2008 06:44

Starman002 replied on November 05, 2008 22:50 to the question "Risk definition update has failed" in Sunbelt Software:

I am Starman002.

I have this problem also. I cleared out the temp files & history in IE6.

I have Current Software Version 3.1.2315 Current Definition 2362, Current VIPRE version 3.1.1601.1.

Can you help?

Starman002 started following the question "Risk definition update has failed" in Sunbelt Software.

Starman002 asked a question in Sunbelt Software on November 05, 2008 22:39:

Definition Update Error

I have a Definition Update Error. Download of threat definitions failed due to internet connection problems. Can you help?