Loading Profile...
Support for Notification of ports status on EM1000
Anybody knows how to implement Notification bits support on a EM1000 and if Virtual Ports is supported for EM1000 on Tibbo's drivers?
Regards
Mauro
Regards
Mauro
I’m happy
1
person has this question
I have this question, too!
Tell me when someone answers.
The more people who ask this question, the more it gets noticed.
The more people who ask this question, the more it gets noticed.
Create a customer community for your own organization
Plans starting at $19/month
-
Inappropriate?Hey Mauro,
Did you resolve this with support?
If not, can you explain a bit more?
Are you trying to use TDST with a Tibbo-BASIC device? That can be done, but you need to make your project understand TDST commands. An example for a project like this is AggreGate Agent, http://aggregate.tibbo.com/files/star... -
Inappropriate?Hi Ezuk,
yes TDST is my aim. I have already a DS program working with Wi-Fi and Ethernet interface , with a lot of comands available. I works very well with TCP , but I have some problem in using UDP, dunno why. I'm writing a small utility to configure parameters non available in DS.
"Agent" project has some fault: in commands like P1 it's prone to fail.
SInce it's editable I want to extend my program's capabilities with a dedicated channel for direct handling of LEDs, Buttons and a TTY screen.
I need to comunicate with it close to Numeric Controls' consoles, yust to interact with Control firmware.
What I can say is that Em1000 is a wonderful boy, but it lacks a little bit of documentation.
Ciao
Mauro
I’m happy
1 person says
this answers the question
-
Inappropriate?Ciao Mauro,
Sounds good!
Does your utility use SDF settings, or send direct commands without settings? I propose you use the SDF format, because future DS Manager versions might have dynamic "setting update" -- i.e, will ask your device what settings it offers for configuration, and show those.
So do you have any specific question at the moment, or is it under control for now? -
Inappropriate?Ciao again,
yes I use SDF both volatile and stored(I learned the DS manager's functions thru its errors!), that's why I found this issue in Agent.
No more question, by now. The only thing is I'm puzzled with UDP in Wi-Fi. There would be no error, since the Access Point is 2 meters from the WA1000... I've implemented a Field's Strength display with the "5 Leds bar". Next step would be all 4 ports simultaneous support.
Ciao
Mauro
I’m confident
-
Inappropriate?Cool! Would love to see some photos of your project once you're done. Good luck! :)
I’m happy
-
Inappropriate?Thank you
For sure you'll be the first to see. I've already a distributor for my work, since it is specially built around Fanuc/Mori Seiki controls
Ciao
Mauro
-
Inappropriate?Hello, Mauro!
Can I ask you what did you mean about agent and "p1 command"? What's wrong with agent?
I’m clear
-
Inappropriate?The scanning tech for commands of Agent fails with mixed alpha+digit, since it can get confused with relative position. if you add as a tail the command P1 or E1 the scan will find LP or PP in settings.txt, because they are LP16PP17 in the string scanned by instr and NEVER finds P1. Hope that my english is clear enough.
Ciao
Mauro
I’m happy
-
Inappropriate?Excuse me. I did not understand your description at all.. What scanning do you mean?
-
Inappropriate?In Agent you build a string with the command (two bytes) and a variabled display type number, for quick command research. If the command contains a digit the search could fail. In your code there were no such an occurrence, but implementing this could happen. It took three hours to figure it out.
-
Inappropriate?Ok. Let us forget about this. Because you have no problems. I think that if somebody will have a problem with Agent he will start new discussion and we will help him. But we have no anybody asking for help. I don't want to waste your time.
Thank you! And good luck! -
Inappropriate?Ok, this was only an hint for you. I used the mainframe of the Agent program to build a complete DS support, with added fetaures and local support.
EMPLOYEE
EMPLOYEE
