Unanswered topics in Tibbo

I need to serve files as content-type text/xml. Can this be done with the embedded web server or do I need to develop my own?

In the Demp project for SNTP called ITS.tpr there is a "magic handshake" with the Timeserver of &H0B followed by forty-seven sequencial &H00's. --- See the function SNTPQuery.

Can any one point me to documentation that explains this specifically?

Thanks,
Mike

I have a problem on converting real value to string.

dim r1 as real
dim s as string

r1 = 1.1
s = ftostr(r1, FTOSTR_MODE_AUTO, 5)

but 's' shows 1.0034 instead of 1 ... is there anyway to solve this problem ??

Thanks

Hi there
I'm puzzled about WA1000, I have a dual interface program, using WLN or NET interfaces. If I chose NET everything is OK, while if I chose WLN it doesn't comunicate. I'm able to see that Association is correct, the wln.scan function returns my network SSID, but I'm not able to ping the WA1000, here is the initialization code for my program:

io.num=PL_IO_NUM_51
io.enabled=YES
io.state=LOW

'WLN CS mapping -- do this before enabling power
wln.csmap=PL_IO_NUM_49
io.num=PL_IO_NUM_49
io.state=HIGH
io.enabled=YES

settings_parse

nomewifi=setting_get("WN")
passwifi=setting_get("WP")
passwifi="" 'this is the password for WEP
' nomewifi="" 'commenting this line the program uses the ethernet NIC otherwise the WIFI
if nomewifi<>"" then
wln.mac="2.0.1.35.34.1"
wln.buffrq(3)
romfile.open("wln_fwar.bin")
if wln.boot(romfile.offset)= NO then
pat.play("~R---------------",PL_PAT_CANINT)
end if

While wln.task<>PL_WLN_TASK_IDLE
Wend

if wln.enabled=NO then
pat.play("~R---------------",PL_PAT_CANINT)
end if

select case len(passwifi)
case 0
wln.wepmode =PL_WLN_WEP_MODE_DISABLED
case 10
wln.wepmode =PL_WLN_WEP_MODE_64
case 26
wln.wepmode =PL_WLN_WEP_MODE_128
end select
if len(passwifi)>0 then
wln.wepkey1=passwifi
wln.wepkey2=passwifi
wln.wepkey3=passwifi
wln.wepkey4=passwifi
wln.setwep
end if
While wln.task<>PL_WLN_TASK_IDLE
Wend
end if

if nomewifi="" then
net.ip = setting_get("IP")
net.gatewayip = setting_get("GI")
net.netmask = setting_get("NM")
else

wln.ip = setting_get("IP") '192.168.1.19
wln.gatewayip = setting_get("GI") '192.168.1.1
wln.netmask = setting_get("NM") '255.255.255.0
wln.scan("")

While wln.task<>PL_WLN_TASK_IDLE
Wend
passwifi=wln.scanresultssid 'just to see if we get the SSID (and see in DEBUG MODE
wln.ssid=nomewifi
wln.settxpower(255)
while wln.task<>PL_WLN_TASK_IDLE
wend
wln.bssmode=PL_WLN_BSS_MODE_INFRASTRUCTURE
'wln.defaultibsschannel=6

wln.associate
While wln.task<>PL_WLN_TASK_IDLE
Wend

If wln.associationstate=PL_WLN_NOT_ASSOCIATED Then
pat.play("R-B-R~",PL_PAT_CANINT)
exit sub
end if
end if

sock.num=SOCK_LS

sock.allowedinterfaces="NET,WLN"

pat.play("~G-G-------------",PL_PAT_CANINT)
ser.flowcontrol=DISABLED
ser.mode=PL_SER_MODE_UART
ser.txbuffrq(2)
ser.rxbuffrq(2)

sock.txbuffrq(4)
sock.rxbuffrq(4)
sock.cmdbuffrq(1) 'buffer for incoming inband commands
sock.rplbuffrq(1) 'buffer for outgoing inband replies
sock.tx2buffrq(4)
sock.protocol=PL_SOCK_PROTOCOL_TCP
' sock.targetip=setting_get("DI") ' Get IP setting here
' sock.targetport=val(setting_get("DP"))
sock.inbandcommands=YES
sock.escchar=255
sock.endchar=13
sock.connectiontout=val(setting_get("CT")) * 60 * 2
sock.inconmode=PL_SOCK_INCONMODE_ANY_IP_ANY_PORT
sock.localportlist=setting_get("PN")
sock.reconmode=PL_SOCK_RECONMODE_3

sock.num=SOCK_UDP
sock.allowedinterfaces="NET,WLN"
sock.txbuffrq(1)
sock.rxbuffrq(1)
sock.protocol=PL_SOCK_PROTOCOL_UDP
sock.localportlist="65535"
sock.inconmode=PL_SOCK_INCONMODE_ANY_IP_ANY_PORT
sock.reconmode=PL_SOCK_RECONMODE_3
sock.acceptbcast=YES

sys.buffalloc
'******END ------------------------------------

Regards and thanks
Mauro

The functions:

s2=!md5ls2(mid(s,35,8))
and
s=!md5ls()

used in "agent" project.
How they work? In the docs they do not apear.

Hello,i have a problem that i need help with.

When network adapter of laptop is configured as Auto mode the tibbo is visible via DS manager and works fine but when i try to change it to full duplex mode i lose tibbo completely
on the network.
The customer transfered from half to full duplex network and now all comunication with tibbo have stopped.

hi!
does tibbo think to include in future devices a better resolution for timers?
let say, 1 mS or better.
bye

I am drawing a EM1000 pcb board about Machine Control Unit with graphic lcd (240x128)

In our application some of the data will come through computer and some of entering by user with keys. Total data memory will be 100 kbyte.

Could you give me your assistance about adding a flash memory ( like M25P40 SPI Flash memory ) to my board or must I wait "fd" command.
When fd command is available, can i write our datas which by taking from ethernet line, to the flash which in EM1000 easily?

Best Regards