DM10 Studio kit hihat pedal not working.

So i have DM10 Studio kit which otherwise works perfectly normally but theres only one issue. Hi hat pedal is not working at all. When i try to calibrate it, open calibration gets completed normally but closed gives error saying something like "closed calibration failed".
I've also tried to reset all settign to factory default but that didnt help either.
So any suggestion how to fix this or do i just need to buy new pedal.

Thank you
1 person has
this question
+1
Reply
  • Hello,

    Thanks for posting. I'd like to help. You'll have to re-calibrate your hi-hat from the following steps below. If you're still having issues re-calibrating, contact Alesis support. Log onto http://www.alesis.com/contact to contact support. 

    To calibrate the hi-hat pedal: 
    1. Connect the hi-hat pedal to the module but do not press it down. 

    2. On the module, press EXT TRIG. 

    3. Use the CURSOR UP / DOWN buttons to highlight the "Input" field at the top of the screen then use the VALUE UP / DOWN buttons or VALUE DIAL to select "HiHat." 

    4. Press CAL (F1). 

    5. With the hi-hat pedal completely raised ("open"), press OPEN (F1) and wait for a message saying the process is complete. 

    6. With the hi-hat pedal completely pressed ("closed"), press CLOS (F2) and wait for a message saying the process is complete. 

    7. If you want to fine-tune how the module detects your pedal's "open" and "closed" positions, press TRIM (F3). Use the CURSOR UP / DOWN buttons to select "Open" or "Closed" and use the VALUE UP / DOWN buttons or VALUE DIAL to adjust the setting. (Tip: Increasing the "Closed" value makes it easier to close the hi-hat or "choke" it.) 

    8. If you want to adjust the response curve of the pedal, press CURV (F4). Use the VALUE UP / DOWN buttons or VALUE DIAL to select the curve that best suits your playing style. (Tip: We recommend using LINEAR, LOG1 or LOG2 for conventional hi-hat performance.) 

    9. When you have adjusted the hi-hat settings to your preference, press EXIT to exit the calibration page (or press DRUM KIT to return to the main screen).
  • (some HTML allowed)
    How does this make you feel?
    Add Image
    I'm

    e.g. kidding, amused, unsure, silly indifferent, undecided, unconcerned happy, confident, thankful, excited sad, anxious, confused, frustrated