Problem with Nanoverb 2

I just got a Nanoverb2. My hope was to feed a microphone into the left input channel and then output it to a Bose Soundlink III via the Nonoverb's output plugs to a 1/8 stereo jack which would plug into the Soundlink Aux. However, when I try to input the microphone, the signal light does not respond, and there's no output. Same thing when I try inputting from an MP3 player. No signal received. I'm trying to use a headset condensor microphone.
Am I doing something wrong or is the Nanoverb defective?
1 person has
this problem
+1
Reply
  • Hello,

    Thanks for the post Richard. The discontinued Nanoverb 2 is one of our Legacy products. Support for discontinued legacy products is limited as we mainly support our current line of products. We'll do our best to help you out.

    When connecting audio cables and/or turning the NANOVERB 2 on and off, make sure all connected devices have their volume controls turned down. The audio inputs and outputs of the NANOVERB 2 are typically used in one of three ways:

    1) From one or two effect/aux send outputs of a mixer, sent back to the effect return inputs of the mixer.

    2) From a line-level instrument (like a guitar or keyboard with either a mono or stereo output), sent out to an amplifier or mixer input.

    3) From the stereo bus outputs of a mixer to a recorder or amplifier.

    MONO - Connect an audio cable from the output of a mono source or Aux Send to the LEFT input of the NANOVERB 2 and then connect another audio cable from the LEFT output of the NANOVERB 2 to the input of a mixer, amplifier, or Aux Return.

    MONO IN, STEREO OUT - Connect a mono output source or Aux Send to the LEFT input of the NANOVERB 2. Then connect two audio cables from the LEFT and RIGHT outputs of the NANOVERB 2 to the inputs of your mixer, amplifier, or Aux Return.

    STEREO - Connect audio cables from the output of a stereo source or Aux Send to the LEFT and RIGHT inputs of the NANOVERB 2. Then connect the LEFT and RIGHT outputs of the NANOVERB 2 to the stereo inputs of a mixer, amplifier, or Aux Return.
  • (some HTML allowed)
    How does this make you feel?
    Add Image
    I'm

    e.g. kidding, amused, unsure, silly indifferent, undecided, unconcerned happy, confident, thankful, excited sad, anxious, confused, frustrated