I have a problem with the tubes of fixodent, it will NOT come out of the tube--it hardens up or freezes up(its not in a cold room) No matter what I do it won't come out Unless I put it in hot water every time ,then it comes out WAY to much. What do I do about that??
Hi Kathy, sorry to hear about the difficulty you’ve had with tubes of Fixodent clogging. Mara is right, many people have success clearing the nozzle with a toothpick. Any moisture around the cap area or tip of the tube could cause the product to harden over time, making the tube difficult to squeeze. To prevent moisture from getting in, wipe the nozzle dry with a cloth or paper towel after use, and tightly close the cap. Be sure to store the tube in a dry area as well. Hopefully, this will help keep the nozzle clear! If you find that warming the tube with hot water makes the product comes out too fast, one thing you can try is squeezing the tube with the cap on (sort of rolling it in your hands) to soften the product up before attempting to dispense it. I hope this helps! :)