Help get this topic noticed by sharing it on Twitter, Facebook, or email.

Epack-Lite 1PH/2PH/3PH Query


This is regarding Epack-Lite single phase, two phase & three phase thyristor power controllers.

We are thinking to use Epack-Lite/3Ph-50A & Epack-Lite/3Ph-100A for 27KW @ 415VAC & 48KW @ 415V AC respectively for our furnace heater control application.

Full load current for 27KW @415VAC is 37.8A &
Full load current for 48KW @ 415VAC is 67.2A

In Epack-Lite there is no current limit option available.
Our query is that is Hardware alarm will occur if we user Epack-Lite for this application?

Since we already used Epack-3PH/50A & 100A with V2CL and product software version is V4.04. With this configuration we are facing hardware alarm issue and after setting CL then the error disappears sometime and again occurring.
Is hardware alarm related with CL?

We also wanted to know that if Hardware alarm appears on Epack screen then what are the possible causes and what type of troubleshooting need to be performed.

Please do the needful.

Thank you

Sujit Jejurkar
1 person has
this question