android insteon feedback problem

i'm controlling an insteon setup using a 2413sh, networked through a digi portserver ts16. my feedbacks, which all work just fine on both of my ipod touches running irule 2.5, don't show up on either of my android devices (incredible 2 and kindle fire) running irule 1.3.3. same exact feedbacks - both numeric and textual. no dice. thoughts?
1 person has
this problem
+1
Reply
  • bump... afraid maybe this got missed, since i posted it while everyone at irule was preoccupied with cedia.
  • (some HTML allowed)
    How does this make you feel?
    Add Image
    I'm

    e.g. sad, anxious, confused, frustrated indifferent, undecided, unconcerned kidding, amused, unsure, silly happy, confident, thankful, excited

  • To really diagnose the problem, I would need the configuration of the feedback in the builder as well as an example of the feedback that is coming back from the device.
  • (some HTML allowed)
    How does this make you feel?
    Add Image
    I'm

    e.g. sad, anxious, confused, frustrated indifferent, undecided, unconcerned kidding, amused, unsure, silly happy, confident, thankful, excited

  • here is an example of one of my insteon feedbacks (note: this is yet another situation where it'd be great if the builder had an "export device/feedback" capability, in addition to the already existing import functionality. but i digress)...

    device feedback: insteon raw feedback
    - starts with: \x02\x50
    code: LR Sofa Table Lamp
    - prefix: \x18\x87\x16*
    value: ON
    - target value: \x11
    - replace with: ON
    value: OFF
    - target value: \x13
    - replace with: OFF
    value: OFF
    - target value: \x00
    - replace with: OFF

    i drag "code: LR Sofa Table Lamp" onto my panel/page so that all three values are parsed in the same place. the on command i send to my 2413sh is as follows:
    \x02\x61\x03\x11\xff

    that breaks down as:
    start of message, message type (61=send group command), group number (group 3), command (11=on), on level (ff=full)

    the full response to the command is (hex):
    02 61 03 11 ff ff 06 02 50 1d fe 9c 18 ce f4 61 11 03 02 58 06 02 50 18 87 16 18 ce f4 61 11 03

    that breaks down as:
    echoed start of message, echoed message type, echoed group number, echoed command, echoed on level, error byte added by digi portserver, ack, start of message, message type (50=direct response), from address byte 1, from address byte 2, from address byte 3 (1d fe 9c=keypad button), to address byte 1, to address byte 2, to address byte 3 (18 ce f4=plm), message flags, command, group number, start of message, message type (58=cleanup status), ack, start of message, message type (50=direct response), from address byte 1, from address byte 2, from address byte 3 (18 87 16=lamp module), to address byte 1, to address byte 2, to address byte 3 (18 ce f4=plm), message flags, command, group number

    for the corresponding off command and response, replace all of the 11's with 13's

    everything in this post (feedback, panel setup, command, and response) is exactly the same in my iOS setup as in my android setups. in my iOS setup the light(s) respond as they should and feedbacks display and change just as they should. in the android setups, the light(s) respond as they should, but feedbacks never show up
  • (some HTML allowed)
    How does this make you feel?
    Add Image
    I'm

    e.g. sad, anxious, confused, frustrated indifferent, undecided, unconcerned kidding, amused, unsure, silly happy, confident, thankful, excited

  • Thanks for the detailed information. I am not exactly sure when I will get a chance to take a look at this. I will be sure to post back with an update as soon as possible. Hopefully I can get this fixed by the next android release.
  • (some HTML allowed)
    How does this make you feel?
    Add Image
    I'm

    e.g. sad, anxious, confused, frustrated indifferent, undecided, unconcerned kidding, amused, unsure, silly happy, confident, thankful, excited

  • Hey just checking in real quick.

    I know it has been a while since you first posted this, and I have not had time to recreate the problem :( sorry about that. I can although give you an update on the status of Android feedbacks.

    We are still working on the next Android release and we hope that this problem is fixed in the upcoming release. I am going to post-pone looking into this until the next version has come out and you have re-tested your feedbacks. We have fixed various bugs within feedbacks and we have tested insteon feedbacks quiet a few times.

    If you would like to be a beta tester and get yourself some early access to the new Android version and help us find bugs before the official release. Take a look at this post

    Testers

    Depending on :

    1. the mobile devices you own

    2. the gear you are controlling

    3. your experience with iRule


    you may be allowed to become a beta tester.

    In your email to beta@iruleathome.com, I would include those things listed above.
  • (some HTML allowed)
    How does this make you feel?
    Add Image
    I'm

    e.g. sad, anxious, confused, frustrated indifferent, undecided, unconcerned kidding, amused, unsure, silly happy, confident, thankful, excited

  • Alex,

    never had a chance to get in on the beta testing, but i upgraded both my phone and my kindle when the new android version was released the other day, and i'm happy to report that my insteon feedback is now working correctly on both devices.
  • (some HTML allowed)
    How does this make you feel?
    Add Image
    I'm

    e.g. sad, anxious, confused, frustrated indifferent, undecided, unconcerned kidding, amused, unsure, silly happy, confident, thankful, excited