Help get this topic noticed by sharing it on
Twitter,
Facebook, or email.
Twitter,
Facebook, or email.
888LM wall remote constantly beeps
My 888LM wall remote constantly beeps. I resynch it to the opener via the learn button but after a few minutes, it beeps again. Anyone else had a similar issue with this?
-
Hello Mark. The 888LM will make a beep sound a few minutes after the 888LM has lost power and after it is fully charged. I would recommend checking the wires that connect to the garage door opener motor.
I would also recommend using a new piece of wire, connecting to the 888LM wires and garage door opener motor. Use a piece of wire approximately 1 foot long. Connect the new wire to the garage door opener. Then connect the new wire to the 888LM wires.
Please let us know if this persists.-
Hyrum Weibling August 24, 2015 01:26How long does it take to recharge the battery?EditDeleteRemove
-
-
Randi August 24, 2015 17:56The yellow command LED and the red learn LED will blink quickly for up to 5 minutes as the control panel recharges. When the control panel is operational, the yellow command LED will glow steadily.EditDeleteRemove
-
-
-
-
-
I am having this same problem. I recently purchased and installed into my garage. However I cant get it to learn and it keeps blinking red and yellow while beeping every minute or so. Please help.
- view 6 more comments
-
-
-
-
-
-
-
139.53970SRT
-
-
Jack - The 888LM only works on Chamberlain, LiftMaster and Craftsman openers that have a red or purple learn button and are manufactured after 1998. This Craftsman opener will only work with the MyQ Garage. http://www.chamberlain.com/smartphone-control-products/myq-garage/model-myq-g0201
-
-
-
Loading Profile...




