Help get this topic noticed by sharing it on
Twitter,
Facebook, or email.
Twitter,
Facebook, or email.
How do program 895Max to control lights on second button with 888LM
I was able to get the 895Max to open and close the garage door easy enough (which turns on the light) with any of the buttons but I just want to be able to program the light (380LM).
-
Gary - There is a two step process for programming the 895MAX to your light. You will have to set the remote and then program it to the door control.
To set the remote:- Using a safety pin or paper clip, press the program button on the side of the remote, until the LED light on the front turns on.
- Press and release the remote button you wish to program (to the light), 1 time.
- Exit the programming by
pressing one of the other 2 buttons on the remote.
- With the door closed, press and hold a remote button that you want to control the light.
- Press and hold the Lock button on the MyQ Control Panel.
- While holding the Lock button, press and hold the Light button on the door control.
- After the opener lights flash, release all three buttons. If light bulbs are not installed, two clicks will be heard.
-
Loading Profile...




EMPLOYEE
